FRAME 2 - TM-9-2320-211-20-3-10859

TM 9-2320-211-20-3-1

FRAME 2

Put tube clamp (1) on air tube (2).

NOTE

There may be an electrical harness clamp ( 3). If so,

put harness clamp on capscrew (4) before screwing on

nut (5). If harness had a plastic tie, put on new tie (6).

Using 7/16-inch wrenches, put capscrew (4) through tube clamp (1) and

screw on and tighten nut (5).

NOTE

Follow-on Maintenance Action Required:

Start engine and let it run until air pressure gage

reads between 65 and 120 psi. Refer to

TM 9-2320-211-10.

2. Stop engine. Refer to TM 9-2320-211-10.

3. Do air system leak test. Refer to para 1-5.

END OF TASK

12-127