Fittings and retaining band. - TM-9-2320-211-20-3-10805

TM 9-2320-211-20-3-1

(3) Fittings and retaining band.

(a) Multiple connector.

CAUTION

Fittings are made of soft brass. They can be

stripped very easily if tightened too much.

Tighten fittings just enough to stop fluid

from leaking.

NOTE

The multiple connector on the right rear-rear

wheel cylinder is used for this typical procedure.

FRAME 1

Put fluid passage bolt (1), washer (2), multiple connector (3), and copper

washer (4) in place as shown. Using 3/4-inch socket wrench, screw in and

tighten fluid passage bolt.

Using 7/16-inch open end wrench, screw on and tighten hose nut (5).

NOTE

Follow-on Maintenance Action Required:

Bleed hydraulic system. Refer to para 12-14.

END OF TASK

12-73