Hydraulic hose. - TM-9-2320-211-20-3-10803

TM 9-2320-211-20-3-1

(2) Hydraulic hose.

CAUTION

Fittings are made of soft brass. They can be

stripped very easily if tightened too much.

Tighten fittings just enough to stop fluid from

leaking.

NOTE

Hydraulic hose at the front wheel cylinder is

used for this typical procedure.

Using 5/8-inch open end wrench, screw on and tighten hose nut (1) .

Put clamp (2) in place on hose (3).

Screw on and finger tighten screw (4) and nut (5). Hook spring (6) around

screw. Using 7/16-inch wrenches, tighten screw and nut.

G O TO FRAME 2

12-71