 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-211-20-3-1
FRAME 5
Turn brake drum (1) until inspection hole (2) is at bottom of left brake
1.
lining.
2.
Put 0.010-inch feeler gage in inspection hole (2) so it is between brake
lining (3) and inside of brake drum (4).
3.
If feeler gage just slides in, take out feeler gage and go to frame 6. If
feeler gage does not just slide in, go to step 4.
4.
Using 1 1/16-inch wrench, loosen and hold anchor pin locknut (5). Using
1/2-inch open end wrench, turn anchor pin (6) to the left until feeler
gage just slides in.
5.
Using 1/2-inch open end wrench, hold anchor pin (6). Using 1 1/ 16-inch
open end wrench, tighten locknut (5).
GO
TO FRAME 6
12-44
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals