FRAME 2 - TM-9-2320-211-20-3-10737

TM 9-2320-211-20-3-1

Put two spacers (1) in place. Working from inside driver's seat and using

9/16-inch wrench, put in and hold two screws (2).

2. Using 9/16-inch socket wrench, screw on and tighten two nuts (3) with two

washers (4).

NOTE

Follow-on Maintenance Action Required:

1. Replace handbrake linkage. Refer to para 12-4.

2. Adjust handbrake linkage. Refer to para 12-6.

3. Replace tool box. Refer to Part 2, para 17-11.

4. Replace operator's seat cushion. Refer to Part 2,

para 17-7.

END OF TASK

12-5