Replacement. - TM-9-2320-211-20-3-10237

TM 9-2320-211-20-3-1

Replacement.

FRAME 1

Slide two clamps (1) on ignition unit (2).

Put ignition unit (2) with two clamps (1) in place. Aline holes in clamps with

holes in manifold (3).

Using 1/2-inch socket wrench with ratchet and 6-inch extension, screw on and

tighten two screws with washers (4).

Using 7/8-inch wrench, screw on and tighten electrical connector (5) to ig-

nition unit (2).

Screw on and tighten electrical connector (6) to ignition unit (2).

NOTE

Follow-on Maintenance Action Required:

Reconnect battery ground cable. Refer to para 7-44.

Close hood. Refer to TM 9-2320-211-10.

END OF TASK

4-153