Cleaning. - TM-9-2320-211-20-3-10200

TM 9-2320-211-20-3-1

Cleaning.

WARNING

Dry cleaning solvent is flammable. Do not use

near an open flame. Keep a fire extinguisher

nearby when solvent is used. Use only in well-

ventilated places. Failure to do this may result

in injury to personnel and damage to equipment.

(1) Clean inner and outer surfaces of metal parts with dry cleaning solvent.

(2) Clean fuel tubes with damp rag and soap.

(3) Take off sludge and gum with a stiff brush.

(4) Steam cleaning may be used to remove grease and dirt after dry cleaning

solvent has been used.

(5) Dry with clean lint-free rags.

(6) Take off rust with a wire brush.

(7) Refer to para 1-3 for additional cleaning steps.

d. Inspection and Repair.

(1) Check all parts for damage.

(2) Get new parts for all damaged parts.

4-116