FRAME 2 - TM-9-2320-211-20-3-10172

TM 9-2320-211-20-3-1

FRAME 2

Put fuel filter (1) and fuel pump (2) in place. Aline holes in two clamps (3).

Using 1/2-inch socket wrench, screw in and tighten two screws with washers

(4).

3. Using 7/16-inch wrench, screw on and tighten tube adapter (5) to filter (1).

4. Using 3/8-inch wrench, screw on and tighten tube adapter (6) to fuel pump

(2).

5. Screw on and tighten electrical connector (7) to fuel pump (2).

NOTE

Follow-on Maintenance Action Required:

Reconnect battery ground cable. Refer to para 7-44.

2. Close hood. Refer to TM 9-2320-211-10.

END OF TASK

4-88