FRAME 2 - TM-9-2320-211-20-3-10125

TM 9-2320-211-20-3-1

FRAME 2

NOTE

If there is a plastic strap holding lines together, use

cutting pliers and cut it off.

Using 9/16-inch open end wrench, hold tee fitting (1). Using 7/16-inch

combination box and open end wrench, unscrew and take off tube nut (2).

2. Using 9/16-inch wrench, unscrew and take off capscrew (3).

NOTE

The number of clamps on any tube differs. Make sure

all capscrews are out before taking tube off.

3. Take off tube (4) and spread open clamp. Take off clamp (5).

END OF TASK

4-41