|
|
TM 9232020910-4
FRAME 2
WARNING
Wear safety glasses or goggles when checking
batteries. Always check electrolyte level with
engine stopped. Do not smoke or use exposed
flame when checking battery explosive gases are
present and severe injury to personnel can result.
Remove all jewelry such as rings, dog tags, bracelets,
etc. If jewelry contacts battery positive terminal and
ground, a direct short will result in instant heating
of tools, causing damage to equipment and injury to
personnel.
1.
Unscrew and take off 12 battery filler caps (1).
2.
Check the electrolyte level in each cell. Electrolyte level should be to the level/split ring in the
battery filler opening. If fluid is low, fill with distilled water to the level ring. If fluid is boil
ing, notify next higher maintenance.
Screw on and tighten 12 battery filler caps (1).
3.
4.
Check tightness of cables (2) to clamps (3) and clamps (2) to terminal posts (4). Tighten
connections if needed.
GO TO FRAME 3
Change 1
2-33
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |