Special Information - TM-55-1730-215-13-P0070

TM 55-1730-215-13&P

(2) Fig. Column. This column lists the number of the figure where the item is identified/located.

The figures are in numerical order in Section II and Section III.

(3) Item Column. The item number identifies the item associated with the figure listed in the adjacent

FIG. column. This item is also identified by the NSN listed on the same line.

b. Part Number Index. Part numbers in this index are listed by part number in ascending

alphanumeric sequence (i.e.. vertical arrangement of letter and number combination which places the first

letter or digit of each group in order A through Z, followed by the numbers 0 through 9 and each following

letter or digit in like order).

(1) FSCM Column. The Federal Supply Code for Manufacturer (FSCM) is a 5-digit numeric code us-

ed to identify the manufacturer, distributor. or Government agency, etc., that supplies the item.

(2) Part Number Column. Indicates the primary number used by the manufacturer (individual. firm,

corporation, or Government activity). which controls the design and characteristics of the item by means of

its engineering drawings, specifications standards, and inspection requirements to identify an item or

range of items.

(3) Stock Number Column. This column lists the NSN for the associated part number and manufac-

turer identified in the Part Number and FSCM Columns to the left.

(4) FIG. Column. This column lists the number of the figure where the item is identified/located in

Section II and III.

(5) Item Column. The item number is that number assigned to the item as it appears in the figure

referenced in the adjacent figure number column.

C-5. Special Information. Use the following subparagraphs as applicable:

a. Usable On Code. The usable on code appears in the lower left corner of the Description column

heading. Usable on codes are shown as "UOC . . . ." in the Description Column (justified left) on the

first line applicable item description/nomenclature. Uncoded items are applicable to all models.

b. Index Numbers. Items which have the work BULK in the figure column will have an index

number shown in the item number column. This index number is a cross-reference between the National

Stock Number/Part Number Index and the bulk material list in Section II.

C - 6 Change 2