 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 55-1510-218-MTF
PROCEDURE TROUBLESHOOTING
REFERENCE
NOTE
Pause for a few seconds after each step to al-
low time for the proper indications.
a. Altitude select controller - Set
to an altitude of more than 1,
000 feet above the altitude in-
dicated on the pilot's altimeter.
Check that pilot's altitude alert
annunciator light on the pilot's
altimeter is extinguished.
b. Altitude select controller - Set
to an altitude of within 1,000
feet above the altitude indicat-
ed on the pilot's altimeter.
Check that pilot's altitude alert
annunciator light on the pilot's
altimeter illuminates.
c. Altitude select controller - Set
to an altitude of less than 250
feet above the altitude indicat-
ed on the pilot's altimeter.
Check that pilot's altitude alert
annunciator light on the pilot's
altimeter is extinguished.
d. Altitude select controller - Set
to an altitude of 300 + 50 feet
above the altitude indicated on
the pilot's altimeter. Check that
pilot's altitude alert annuncia-
tor light on the pilot's altimeter
illuminates.
e. Altitude select controller - Set
desired altitude.
2-35
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals