|
|
TM 5-5420-279-23
b.
The Tables 1 to 17 are to be used as a guide to which solenoids are activated when the
title operation is being performed. The table should be used in conjunction with Annex 1 General,
Figure 3 Solenoid Energisation Chart. The information in the table does not supersede the
information contained within Annex 1 General, Figure 3 Solenoid Energisation Chart. Note; SV =
Solenoid Valve and LS = Load Sensing.
c.
A guide to some of the component parts of the electrical system is provided in Table 18.
The guide consists of the relevant electrical symbol, used in the electrical circuit diagrams, and a
brief description. An electrical component may be made up of one or more of the symbols shown.
Table
Operation
Page
Table 1.
A-Frame Folding
3
Table 2.
A-Frame Rotate
3
Table 3.
Slide Frame Extend
3
Table 4.
Relax
3
Table 5.
Power On
4
Table 6.
Articulator
4
Table 7.
Beam Drive
4
Table 8.
Articulator Slow (Far Bank Seat)
6
Table 9.
Articulator Stowing (Stowing Cylinder)
7
Table 10. A-Frame Raise
8
Table 11. Bridge Angle Select
8
Table 12. Carriage Drive (CARRIAGE EMPTY)
9
Table 13. Carriage Drive (HIGH_BANK) (Tilt Roller)
10
Table 14. Carriage Drive (LEVEL_BANK) (Tilt Roller)
11
Table 15. Carriage Drive (LOW_BANK) (Tilt Roller)
13
Table 16. Bridge Lift (Bottom Winch Only)
15
Table 17. Top Winch Only for Maintenance
16
Table 18. Electrical Symbols
17
Appendix G Page 2
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |