|
|
TM 5-5420-279-23
(7)
Apply thread-locking compound to the propshaft bolts.
(8)
Fit the propshaft (3) to the PTO (1).
(9)
Secure the propshaft (1) with new nyloc nuts and bolts and torque tighten to 73 lb/ft
(100 Nm).
(10)
Grease the propshaft.
(11)
Top up the transmission oil as required.
(12)
Switch the battery shutoff switch to the on position.
(13)
Check the operation of the PTO and check for oil leaks.
c.
Follow on task
(1)
Fit the left side noise panel. See TM 9-2320-364-20-5 Chapter 17 paragraph 17-28.
6-136
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |