Follow on tasks - TM-5-5420-279-230839

TM 5-5420-279-23

(2)

Fit the bearings (19) to the rope pulleys (16). Refer to general unit maintenance procedure

5-158 before assembling the rope pulley bearings.

(3)

Fit the spacer (12) between the inner faces of the rope pulleys (16).

(4)

Apply multi-gasket to the sealing caps (9 and 13).

(5)

Fit the sealing caps (9 and 13) to the outer faces of the rope pulleys (16).

(6)

Position the rope pulleys (16) in the lower pulley block (4).

(7)

Fit the pulley pin (14) through the lower pulley block (4) and the rope pulleys (16).

(8)

Apply thread-locking compound to the screws (6).

(9)

Secure the pulley pin (14) with the end cap (8), lock washers (7) and screws (6).

(10)

Grease the pulley pin (14) through the grease fitting (15).

(11)

If previously removed, apply thread-locking compound to the screws (10 and 17).

(12)

Fit the rope guards (11 and 18) and secure with screws (10 and 17).

(13)

Check that the rope pulleys (16) rotate freely.

Follow on tasks

(1)

Fit the lower winch rope in accordance with direct support maintenance procedure 6-015.

(2)

Check the operation of the lower pulley block assembly.

6-95