Remove - TM-5-5420-279-230832

TM 5-5420-279-23

Remove

(1)

Remove the upper winch rope in accordance with direct support maintenance procedure

6-014.

(2)

Remove the lower winch rope in accordance with direct support maintenance procedure

6-015.

(3)

Remove the forward launch beam carriage stops (5). See unit maintenance procedure

5-058.

(4)

Release the restraining latch (4) between the far bank carriage and the home bank

carriage

(5)

Attach suitable lifting equipment to the far bank carriage (1) and remove it from the launch

beam.

(6)

Place and support the far bank carriage (1) on a suitable working surface.

(7)

Release the restraining latch (3) between the launch frame and the home bank carriage.

(8)

Attach suitable lifting equipment to the home bank carriage (2) and remove it from the

launch beam.

(9)

Place and support the home bank carriage (1) on a suitable working surface.

(10)

Refer to the relevant maintenance procedures for carrying out any servicing or

maintenance on the far and home bank carriages.

Install

(1)

Attach suitable lifting equipment to the home bank carriage (2) and lift it onto the launch

beam.

(2)

Engage the restraining latch between the launch frame and the home bank carriage.

(3)

Attach suitable lifting equipment to the far bank carriage (1) and lift in onto the launch

beam.

(4)

Engage the restraining latch between the far and home bank carriages.

(5)

Fit the forward launch beam carriage stops. See unit maintenance procedure 5-058.

(6)

Fit the upper winch rope. See direct support maintenance procedure 6-014.

(7)

Fit the lower winch rope. See direct support maintenance procedure 6-015.

Follow on task

(1)

Check the operation of the far and home bank carriages.

6-88