Remove - TM-5-5420-279-230783

TM 5-5420-279-23

Remove

(7)

De-pressurize the hydraulic system. Refer to unit maintenance procedure 5-118.

(8)

Remove the left-hand launch frame guard to gain access to the winch manifold assembly

(1).

(9)

Note the position of and disconnect all the hydraulic pipe work connected to the winch

manifold assembly (1).

(10)

Note the position of and remove the electrical connections (2) on the winch manifold

(11)

Support the weight of the winch manifold assembly(1).

(12)

Remove the mounting six bolts, nuts and washers (3) securing the winch manifold

assembly (1) to the launch frame.

(13)

Remove the winch manifold assembly (1).

(14)

Note the position of and remove all hydraulic valves, valve blocks, test points, blanking

plugs and blanking flanges.

(15)

Fit the hydraulic valves, valve blocks, test points, blanking plugs and blanking flanges to

the new manifold assembly using new gaskets and O-rings where applicable.

6-39