Install - TM-5-5420-279-230686

TM 5-5420-279-23

Install

(1)

Locate the stabilizer leg (1) on the pipe support (10).

(2)

Insert the pin (6) and the pin retaining clip (7).

(3)

Position and secure the disk (9) with the two screws (8).

(4)

Fit the two hydraulic pipes (5) in the positions noted during removal.

(5)

Fit the electrical cable (4) at the micro switch.

(6)

Fit the retention cable (3) to the stabilizer leg (10) with the pin (2).

(7)

Grease the pipe support (10) through the grease fitting mounted on the stabilizer leg.

Follow on tasks

(1)

Switch the battery shutoff switch to the on position.

(2)

Check the operation of the stabilizer leg in accordance with the operator's manual TM

5-5420-279-10.

5-430