Remove - TM-5-5420-279-230540

TM 5-5420-279-23

Remove

(1)

Position the tilt roller assembly (3) to gain access to the shoot bolt under repair.

(2)

Remove the four bolts and washers (5) securing the upper shoot bolt to the slide frame.

(3)

Remove the upper shoot bolt housing (1). It may be necessary to pry it over the two spring

pins (2).

(4)

The lower shoot bolt housing (4) is removed in the same way but it does not have spring

pins fitted.

(5)

Check all threaded components for damage.

(6)

Check the spring pins for damage.

(7)

Replace components as necessary.

Install

(1)

Place the upper shoot bolt housing (1) on the slide frame.

(2)

Loosely fit the washers and bolts (5).

(3)

Fit the spring pins (2).

(4)

Tighten the bolts (5).

(5)

The lower shoot bolt housing (4) is installed in the same way but it does not have spring

pins fitted.

5-284