Install - TM-5-5420-279-230502

TM 5-5420-279-23

Install

(1)

Partly insert retaining clip (6) into far bank support and fit compression springs (7).

(2)

Partly compress springs (7) and insert spring pins (8). Ensure spring pins (8) protrude

equally each side of retaining clip.

(3)

Make sure retaining clip operates smoothly.

(4)

Insert the ball joint (3) into the support bearing pad.

(5)

Locate the washer (4) and insert the pin (5) through the washer, support bearing pad (2)

and ball joint (3).

(6)

Refit support bearing pad (2) to the far bank support.

(7)

Ensure that the support bearing pad moves freely on the ball joint.

5-246