Remove - TM-5-5420-279-230492

TM 5-5420-279-23

Remove

(1)

Remove reservoir mounting bolts, from back side of reservoir. Slide reservoir forward to

gain access to the slide retention upper bolt (6).

(2)

Loosen lower slide retention bolt (6).

(3)

Remove slide pad (8).

(4)

Remove screws (3) and slide retention block (4).

(5)

Remove slide pad (5).

(6)

Remove screws (6) and slide retention block (7).

(7)

Remove screws (9) and cover plate (10).

(8)

Remove slide pad (11).

(9)

Measure the thickness of the slide pad (11), if the thickness is 7/10 inch (18.1mm) or less,

replace all slide pads (5, 8 and 11).

(10)

Check all components for wear and damage.

(11)

Change components as necessary.

Install

(1)

Apply thread-locking compound to all screws before installation.

(2)

Insert slide pad (5) under reservoir bracket (1).

(3)

Fit slide retention block (4) and screws (3).

(4)

Secure slide pad (5) in position with slide retention block (4) and screws (3).

(5)

Insert slide pad (8) under reservoir bracket (1).

(6)

Fit slide retention blocks (7) and screws (6).

5-236