Remove - TM-5-5420-279-230479

TM 5-5420-279-23

Remove

(1)

There is a rear carriage restraint latch (1) fitted to the lower frame member on either side of

the launch frame.

(2)

Remove the nyloc nut (2) and the plain washer (3), which hold the carriage latch (1) onto

the hinge, pin (4).

(3)

Rotate the carriage latch (1) upwards until the hooked end is clear of the latch pin (5).

(4)

Slide the carriage latch (1) off the hinge pin (4).

(5)

Replace the rear carriage latch (1) with a new item.

(6)

Check the bushing (6) in the new carriage latch.

(7)

Examine the hinge pin (4) for wear and distortion.

(8)

Examine the latch pin (5) for wear and distortion.

(9)

Examine the spacer (7) for wear.

(10)

Replace the nyloc nut (2) with a new item.

(11)

Examine all components for damage and corrosion.

(12)

Replace as necessary.

Install

(1)

Fit the rear carriage restraint latch (1) onto the hinge pin (4).

(2)

Lower the hooked end of the carriage latch (1) onto the latch pin (5).

(3)

Fit the new plain washer (3) and nyloc nut (2) and tighten.

(4)

Check the operation of the carriage latch (1) to ensure smooth operation.

5-223