 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 5-5420-279-23
a.
Remove
NOTE
With the A-Frame deployed and leveled the shoot bolt (3) should slide easily through the
slide frame web (5) and the A-Frame boss (4).
(1)
With the shoot bolt (3) fully retracted, unscrew the shoot bolt handle (2).
(2)
Slide the shoot bolt (3) out of the shoot bolt housing (1).
(3)
Remove the four screws (6) holding the shoot bolt housing (1) to the A-Frame (4).
(4)
Lift the shoot bolt housing (1) clear of the slide frame.
(5)
Examine all components for damage and corrosion.
(6)
Examine bolt heads and threads for damage.
(7)
Replace components as required.
b.
Install
(1)
Apply thread locking compound to the four screws (6).
(2)
Fit the shoot bolt housing (1) to the A-Frame and secure with the four screws (6).
(3)
Replace the shoot bolt (3) into the shoot bolt housing (1).
(4)
Use thread-locking compound on the screw threads, refit and tighten the shoot bolt handle
(2).
(5)
Engage the shoot bolt (3) with the slide frame web (5) and the A-Frame boss (4).
c.
Follow on tasks
(1)
Check operation of shoot bolt (3).
5-121
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals