Follow on tasks - TM-5-5420-279-230365

TM 5-5420-279-23

NOTE

The stop track (2) complete with items (3, 4, 5 and 10) is fitted with slide block (4) located

behind the slide pads (20 and 24) on the A-Frame stabilizer leg assembly.

(16)

Refer to the slide block assembly illustration.

(17)

Apply thread locking compound to the screws (25 and 26).

(18)

Secure wear pads (20 and 24) to the A-Frame stabilizer leg in the position noted during

removal.

(19)

Fit bumper and spacer (21) to the A-Frame stabilizer leg with lock washers (22) and screws

(23).

(20)

Refer to the handle assembly illustration.

(21)

If removed fit the thread insert (7) to the stop track (2).

(22)

Place the bushing (13), spring (12) and spacer (11) on the A-Frame bracket.

(23)

Feed shaft (1) upward through items (11 through 13).

(24)

Apply thread locking compound to the screws (6)

(25)

Secure shaft (1) to stop track (2) with screws (6).

(26)

Fit spring pin (19) through shaft (1).

(27)

Fit handle (18) complete with items (14, 15 and 17) to shaft (1) and secure in place with

quick release pin (16).

Follow on tasks

(1)

Check the operation of the bridge stop emergency.

5-109