Table 5.14 Launcher Components PMCS

TM 5-5420-279-23

Table 5.14 Launcher Components PMCS - Relax Mechanism

Fig No

PROCEDURES

REMARKS

Equipment is not

a. Check the cylinders (A) for hydraulic leaks.

ready/available for use,

b. Check the packing pads (B) for wear or damage.

if damage or defects

c. Check the limit switches (C) for damage.

are found while

carrying out steps a. to

d. Operate the shoot bolt (D) and check that the cam

actuates the limit switch (C).

e. Check all mounting and support brackets for cracks,

corrosion or other damage.

f. Check the security of all fixings.

g. Check all components for damage to protective paint

film.

Table 2.15 Launcher Components PMCS - Bridge Module Lifting Beam

Fig No

PROCEDURES

REMARKS

Equipment is not

a. Check that the shoot bolts (A) are secure and not

ready/available for use,

damaged.

if damage or defects

b. Check the locking pin holes for elongation and wear.

are found while

c. Check that the pivot bolts (B) are secure and that the

carrying out steps a. to

split pins are in place.

d. Check the lifting arm pivots for vertical free play on bolt

of the spacer tubes.

e. Check that the support arms (C) have free movement

and that they are not damaged.

f. Check that the shackles (D) and lifting hooks (E) are

secure and free from damage and wear.

5-22