Special Information - TM-11-6625-623-20P0006

TM 11-6625-623-20P

g. Unit of Measure (U/M). Indicates the standard of

Application/Explanation

Code

the basic quantity of the listed item as used in performing

H -- The lowest maintenance level capable of complete

the actual maintenance function. This measure is

repair of the support item is the general support

expressed by a two-character alphabetical abbreviation

level.

(e.g., ea, in, pr, etc). when the unit of measure differs

from the unit of issue, the lowest unit of issue that will

satisfy the required units of measure will be requisitioned.

Application/Explanation

Code

Z -- Nonreparable. No repair is authorized.

h. Quantity Incorporated in Unit. Indicates the

quantity of the item used in the breakout shown on the

illustration figure, which is prepared for a functional

(3) Recoverability code. Recoverability codes are

group, subfunctional group, or an assembly.

assigned to support items to indicate the disposition

4. Special Information

action on unserviceable items. The recoverability code is

a. The following publication pertains to the

entered in the fifth position of the Uniform SMR Code

MK-722/URC and its components:

format as follows:

TM 11-6625-623-12, Maintenance Kit, Electronic

Z -- Nonreparable item. When unserviceable, condemn

Equipment MK-722/URC

and dispose at the level indicted in position 3.

TM 11-6625-612-40P, Maintenance Kit, Electronic

Equipment MK-722/URC

H -- Reparable item. When uneconomically reparable,

TM 11-6625-623-45, Maintenance Kit, Electronic

condemn and dispose at the general support level.

Equipment MK-722/URC

c. National Stock Number. Indicates the National

b. The illustrations in this manual are identical to

stock number assigned to the item and will be used for

those published in TM 11-6625-623-40P. Only those

requisitioning purposes.

parts assigned the third position SMR maintenance code

"C" or "O" are listed in the tabular listing; therefore, there

may be a break in the item number sequence. Only

d. Part Number. Indicates the primary number used

illustrations containing organizational authorized items

by the manufacturer (individual, company, firm,

appear in this manual.

corporation, or Government activity), which controls the

design and characteristics of the item by means of its

5. How to Locate Repair Parts

engineering drawings, specifications, standards, and

a. When National stock number or part number is

inspection requirements to identify an item or range of

unknown.

items.

(1) First. Using the table of contents, determine the

NOTE

functional group within which the item belongs. This is

necessary since illustrations are prepared for functional

When a stock numbered item is requisitioned,

groups and listings are divided into the same groups.

the repair part received may have a different

part number than the part being replaced.

(2) Second. Find the illustration covering the

functional group to which the item belongs.

e. Federal Supply Code for Manufacturer (FSCM).

The FSCM is a 5-digit numeric code listed in SB 708-42

(3) Third. Identify the item on the illustration and

which is used to identify the manufacturer, distributor, or

note the illustration figure and item number of the item.

Government agency, etc.

(4) Fourth. Using the Repair Parts Listing, find

f. Description. Indicates the Federal item name and,

the figure and item number noted on the illustration.

if required, a minimum description to identify the item.