|
|
TM 11-6625-601-20P
SECTION I
INTRODUCTION
Code
Definition
1. Scope
XD -- A support item that is not stocked. When
required, item will be procured through
This manual lists spares and repair parts; special
normal supply channels.
tools; special test, measurement, and diagnostic
NOTE
equipment (TMDE), and other special support
Cannibalization or salvage may be used as
equipment required for performance of organiza-
a source of supply for any items source
tional maintenance of the MK-733/ARC-54. It au-
codes above except those coded XA and
thorizes the requisitioning and issue of spares and
aircraft support items as restricted by AR
repair parts as indicated by the source and mainte-
700-42.
nance codes.
(2) Maintenance code. Maintenance codes are
2. General
assigned to indicate the levels of maintenance
authorized to USE and REPAIR support items. The
This Repair Parts and Special Tools List is divided
maintenance codes are entered in the third and
into the following sections:
fourth positions of the Uniform SMR Code format as
a. Section II. Repair Parts List. A list of spares and
follows:
repair parts authorized for use in the performance of
(a) The maintenance code entered in the third
maintenance. The list also includes parts which must
position will indicate the lowest maintenance level
be removed for replacement of the authorized parts.
authorized to remove, replace, and use the support
Parts lists are composed of functional groups in
item. The maintenance code entered in the third
numeric sequence, with the parts in each group
position will indicate one of the following levels of
listed in figure and item number sequence.
maintenance:
b. Section III. Special Tools List. Not applicable.
Code
c. Section IV. National Stock Number and Part
Application/Explanation
O --Support item is removed, replaced, used at
Number Index. A list, in National item identification
the organizational level.
number (NIIN) sequence, of all National stock
(b) The maintenance code entered in the
numbers (NSN) appearing in the listings, followed by
fourth position indicates whether the item is to be
a list, in alphameric sequence, of all part numbers
repaired and identifies the lowest maintenance level
appearing in the listings. National stock numbers
with the capability to perform complete repair (i.e.,
and part numbers are cross-referenced to each
all authorized maintenance functions). This position
illustration figure and item number appearance.
will contain one of the following maintenance codes:
3. Explanation of Columns
Code
Application/Explanation
F--
The lowest maintenance level capable of
a. Illustration. This column is divided as follows:
complete repair of the support item is the
(1) Figure number. Indicates the figure number
direct support level.
of the illustration on which the item is shown.
D--
The lowest maintenance level capable of
(2) Item number. The number used to identify
complete repair of the support item is the
item called out in the illustration.
depot leveL
b. Source, Maintenance, and Recoverability (SMR)
Z--
Nonreparable. No repair is authorized.
Codes.
(3) Recoverability code. Recoverability codes are
(1) Source code. Source codes indicate the
assigned to support items to indicate the disposition
manner of acquiring support items for maintenance,
action on unserviceable items. The recoverability
repair, or overhaul of end items. Source codes are
code is entered in the fifth position of the Uniform
entered in the first and second positions of the
SMR Code format as follows:
Uniform SMR Code format as follows:
Recoverability
Definition
Code
PA -- Item procured and stocked for anticipated or
Definition
Codes
Z--
Nonreparable item. When unserviceable,
known usage.
condemn and dispose at the level indicated
PD -- Support item, excluding support equipment,
in position 3.
procured for initial issue or outfitting and
F--
Reparable item. When uneconomically re-
stocked only for subsequent or additional
parable, condemn and dispose at the direct
initial issues or outfittings. Not subject to
support level.
automatic replenishment.
1
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |