Tool and Test Equipment Requirements

TM 11-6625-601-12

figure represents the average time required to

numbers in this column coincide with the numbers

used in the tools and equipment column of the

restore an item (assembly, subassembly, compo-

MAC. The numbers indicate the applicable tool or

nent, module, end item or system) to" a serviceable

test equipment for the maintenance functions.

condition under typical field operating conditions.

This time includes preparation time, troubleshoot-

b. Maintenance Category. The codes in this

ing time, and quality assurance/quality control

column indicate the maintenance category allo-

time in addition to the time-required to perform the

cated the tool or test equipment.

s p e c i f i c tasks identified for the maintenance

c. Nomenclature. This column lists the noun

functions authorized in the maintenance alloca-

name and nomenclature of the tools and test

tion chart. Subcolumns of column 4 areas follows:

equipment required to perform the maintenance

C -- Operator/Crew

functions.

O -- Organizational

F -- Direct Support

d. National/NATO Stock Number. This column

H -- General Support

lists the National/NATO stock number of the

D -- Depot

specific tool or test equipment.

e. Column 5, Tools and Equipment. Column 5

e. Tool Number. This column lists the manufac-

specifies by code, those common tool sets (not

turer's part number of the tool followed by the

individual tools) and special tools, test, and support

Federal Supply Code for manufacturers (5-digit) in

equipment required to perform the designated

parentheses.

function.

f. Column 6, Remarks. Column 6 contains an

alphabetic code which leads to the remark in

C-5. Remarks (Sec IV)

section IV, Remarks, which is pertinent to the item

a. Reference Code. This code refers to the

opposite the particular code.

appropriate item in section II, column 6.

C-4. Tool and Test Equipment Require-

b. Remarks. This column provides the required

ments (See III)

explanatory information necessary to clarify items

appearing in section II.

a. Tool or Test Equipment Reference Code. The

C-2 Change 3