Figure 23. Radio Set Simulator panel controls, indicator, and connectors.

C2, TM 11-6625-564-12

Figure 23. Radio Set Simulator panel controls, indicator, and connectors.

Connects

Position

Control

Cable

From

OFF

POWER RESET

FUNCTION SELECT

+27.5-volt dc power supply

OFF

J5 of test unit

PTT

OFF

J13 of receiver-transmitter

J3 of test unit

Dummy load or antenna

J4 of test unit

None

b . Bench Test Connections. Figure 24

shows typical bench test setup connections for

2-8. Stopping Procedures for Test Unit

testing the receiver-transmitter, Make the con-

Perform the following steps to remove the

nections as indicated in the following chart:

test unit from operation:

a. Set the following switches to OFF;

Connects

(1) PTT switch.

Cable

From

(2) FUNCTION SELECT switch.

(3) POWER switch,

J2 of test unit

J12 of receiver-transmitter

Jll of receiver-transmitter

b. Disconnect all cables from the test unit.

J1 of test unit