 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TB 750-25
(c) Entries must not contain any blanks, special characters, or the alpha
characters I or 0.
(d) Entries can only have W in the first position.
(e) There will be only one schedule UIC per owner UIC.
(7) Block 7 - OWNER UIC. Limited to six characters.
(a) If ADD is checked in block 22, then block 7 must have an entry.
(b) Entries must not contain any blanks, special characters, or the alpha
characters I or 0.
(c) For contractors, use "K" plus their five-digit manufacturing code which
will be assigned by the USATA. All other agency codes will be assigned by the POC at
the USATA after determination of owner affiliation (Navy, Air Force, Marines, etc.).
(d) Use UIC of unit that owns TMDE, not the parent unit or maintenance
unit that provides support.
NOTE:
Never use a DODAAC.
(8) Block 8 - SERIAL NUMBER. Limited to 10 characters.
(a) Must have an entry. Cannot be blank or all zeroes.
(b) Enter serial number exactly as shown on the instrument, including
leading zeros, slashes, dashes, etc. Note: Do not "zero" fill if less than 10 characters.
(c) If longer than 10 characters delete from left side.
(d) Use joint electronics type designator system (JETDS) serial number, if
available, otherwise use the manufacturer serial number.
(9) Block 9 -MODEL NUMBER. Limited to 12 characters.
(a) Must have an entry.
(b) List item as found in TB 43-180.
(c) If item is not found in TB 43-180, enter number found on instrument,
but omit special characters.
(d) If JETDS item, use JETDS number.
(10) Block 10 - MFG CODE. Limited to five characters.
Change 1
D-3
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals