ROTOR, STATOR, AND DRIVE END BELL ASSEMBLY.

TM 9-2920-225-34

2-6. ROTOR, STATOR, AND DRIVE END BELL ASSEMBLY.

TOOLS : No special tools required

SUPPLIES : Artillery and automotive grease, type GAA, MIL-G-10924

Solvent, dry cleaning, type II (SD-2) Fed. Spec P-D-680

Felt, 1/8-inch thick

Masking tape, PPP-T-42C

PERSONNEL:

One

EQUIPMENT CONDITION : Generator removed from vehicle, pulley removed from

generator.

(1) Remove regulator assembly. Refer to para 2-3.

(2) Remove end housing and insulator. Refer to para 2-4.

(3) Remove intermediate housing. Refer to para 2-5.

Disassembly.

CAUTION

Be careful when taking apart rotor, stator, and

drive end bell assembly. If any part is damaged,

generator is nonrepairable.

FRAME 1

Take off nut (1), washer (2), and woodruff key (3) from shaft (4) of fan

and rotor assembly.

GO TO FRAME 2

2-25