Plugs or tape put on turbocharger during removal must
b e taken off during replacement.
Soldier A 1.
S l i d e air inlet hose (1) in place and tighten hose clamps (2).
2 . Put turbocharger gasket (3) in place. Put turbocharger (4) in
p l a c e and hold until soldier B puts in mounting screws and nuts.
3 . Put in two screws (5).
P u t on four nuts with lockwashers (6).
P u t oil inlet adapter with gasket (7) in place. Put in two screws
w i t h lockwashers (8).
P u t oil inlet line (9) in place. Tighten two fitting nuts (10).
GO TO FRAME 3