5-27. TAPPET CHAMBER COVER.
P u t tappet chamber cover with gasket (1) on engine block (2).
P u t two flame heater tubes (3) and tube clamps (4) in place. Put in two
s c r e w s with flat washers (5).
P u t in screw with starwasher (7).
P u t ground strap (6) in place.
Put in screws with flat washers (8) only as shown. Two
s c r e w holes (9) will be used to mount fuel filter.
P u t in six screws with flat washers (8).
END OF TASK