5-25. AIR COMPRESSOR.
A l l Engines Except LDS-465-2.
P u t air compressor gasket (1) in place. P u t air compressor (2) in place. Put
o n four nuts with lockwashers (3) and tighten nuts to 25 pound-feet.
L o o s e n two screws with lockwashers (4). U s i n g pulley adjusting wrench (5),
t u r n pulley half (6) to the left and take it off.
Refer to TM 9-2320-211-20 for correct drive belt tension.
H o l d compressor drive belt (7) while turning pulley half
( 6 ) until drive belt moves out to bevel surface of pulley
P u t on drive belt (7) and put on pulley half (6). Using pulley adjusting
w r e n c h (5), tighten pulley half until drive belt tension is correct. Put in
t w o screws with lockwashers (4).
END OF TASK