T u r n rheostat (1) until voltmeter (2) reads 24 volts. Pressure gage (3) should
read 90 to 100 psi.
P u t bucket (4) under nozzle and valve assembly (5) to catch discharged fuel.
T u r n adjustable valve (6) to give fuel flow to nozzle and valve assembly (5).
C h e c k that spray pattern (7) is a uniform, fine spray cone with an angle of
60° to 80°. G e t a new nozzle and valve assembly (5) if there is no spray
p a t t e r n or if spray pattern is coarse or out of shape.
Turn off adjustable valve (6).
Turn off rheostat (1).
T u r n on adjustable valve (6) to bleed off pressure.
END OF TASK