(2) Shim type nozzle and valve holder.
Work area must be kept clean.
D o not touch valve (1) with hands. Oil may rub off
c a u s i n g a sticking valve which can damage equipment.
D o not let polished surface of valve or valve body (2)
t o u c h any hard surfaces. Nicks or scratches can
d a m a g e equipment.
H o l d valve (1) with pliers, as shown, and push into valve body (2).
P u t valve (1) with valve body (2) into nozzle holder (3). Put nozzle holder
i n t o soft-jawed vise as shown.
Put on and tighten nozzle capnut (4) to 40 to 45 pound-feet.
GO TO FRAME 2