Engines LD-465-1, LD-465-1C, LDT-465-1C, and LDS-465-1A.
T a k e off two clamps (1).
C l e a n inside and outside of three tubes (2, 3, and 4) with soap and water and
d r y with clean cloth.
Dry cleaning solvent is flammable. Do not use near
a n open flame. Keep a fire extinguisher nearby when
s o l v e n t is used. Use only in well-ventilated places.
F a i l u r e to do this may result in injury to personnel
a n d damage to equipment.
Do not let dry cleaning solvent touch three tubes
( 2 , 3, and 4).
Tubes will dry out, rot, and need
If dry cleaning solvent splashes on
t u b e s , dry them with clean cloth.
C l e a n two clamps (1), two screws (5), and six tube nuts (6) with dry cleaning
s o l v e n t . Use a stiff brush to take off sludge or gum deposits. Dry with clean
END OF TASK