FRAME 63

TM 9-2815-210-34-2-2

FRAME 63

NOTE

M a i n bearing caps (1) with bearing halves (2) and main

b e a r i n g saddles (3) are called by numbers one to seven

c o u n t i n g from front to rear of crankcase (4).

N u m b e r three, number five, and number six main bearing

caps (1) look the same. They are marked with their

number.

P u t number three main bearing cap (1) with bearing half (2) on number three

m a i n bearing saddle (3). Mounting holes in number three main bearing cap

m u s t line up with screw holes in number three main bearing saddle.

Coat two bolts (5) and washers (6) lightly with engine lubricating oil. Put in

a n d hand tighten two bolts and washers.

U s i n g torque wrench, tighten two bolts (5) to 80 to 90 pound-feet.

U s i n g torque wrench, tighten two bolts (5) to 115 to 120 pound-feet.

D o this frame again for number five main bearing cap with bearing half

a n d number six main bearing cap with bearing half.

GO TO FRAME 64

4-87