Seven main bearing caps (1) are line bored with
crankcase (2). If any main bearing cap is damaged,
crankcase and all main bearing caps must be thrown
Main bearing bores are called by numbers one to seven
counting from front to rear of crankcase (2).
Using dial indicator, measure inside diameter of number five bearing bore (3).
I n s i d e diameter must be 3.9370 to 3.9380 inches.
I f inside diameter of number five bearing bore (3) is not 3.9370 to 3.9380
i n c h e s , throw away crankcase (2) and get a new one.
New crankcase (2) will come with new main bearing caps
I f diameter of number five main bearing bore (3) is 3.9370 to 3.9380 inches,
t a k e out two bolts and washers (4) and take off number five main bearing
GO TO FRAME 52