Installation. - TM-9-2320-366-20-31064

TM 9-2320-366-20-3

7-63. M1093/M1094 CAB CLEARANCE AND MARKER LIGHTS UPPER CABLE

ASSEMBLY REPLACEMENT (CONT)

(7) Remove M1093/M1094 cab clearance and marker lights

upper cable assembly (15) from cab roof (7).

b. Installation.

NOTE

Transfer mechanics wire to new

M1093/M1094 cab clearance and marker

lights upper cable assembly.

(1) Position M1093/M1094 cab clearance and marker lights

upper cable assembly (1) in cab roof (2).

NOTE

All M1093/M1094 cab clearance and marker

lights are installed the same way. Upper left

cab marker light shown.

Refer to Table 7-3. M1093/M1094 Cab

Clearance and Marker Lights Connectors for

combinations of terminal lugs and connectors on

each light.

(2) Install gasket (3) on marker light (4).

(3) Connect connector (5) to marker light connector 489 (6).

(4) Install lockwasher (6.1) and terminal lug (7) on marker

light (4) with lockwasher (8) and nut (9).

7-308

Change 1