M1093/M1094 CAB CLEARANCE AND MARKER LIGHTS LOWER CABLE ASSEMBLY REPLACEMENT

TM 9-2320-366-20-3

7-62. M1093/M1094 CAB CLEARANCE AND MARKER LIGHTS LOWER CABLE

ASSEMBLY REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Material/Parts

Batteries disconnected (para 7-57).

Dispenser, Pressure Sensitive Adhesive Tape

PDP cover removed (para 16-2).

Lockwasher (2) (Item 88, Appendix G)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-75 lb-in. (Item 90, Appendix B)

a. Removal.

(1) Remove three screws (1) and washers (2) from PDP (3).

(2) Remove three screws (4) from PDP (3).

(3) Lift PDP (3) outward to gain access.

NOTE

Tag wires and connection points prior to

disconnecting.

(4) Remove two nuts (5), lockwashers (6), washers (7), and

cover (8) from terminal board TB1 (9).

Discard

(5) Disconnect terminal lug TL74 (10) from terminal board

TB1 (9) position 3.

(6) Disconnect terminal lug TL86 (11) from terminal board

TB2 (12) position 4.