 |
|||
|
|
|||
|
|
|||
| ||||||||||
|
|
 TM 9-2320-366-20-3
(11) Remove two nuts (30), screws (31), reinforcing plate
(32), and RH bracket (33) from battery box (5).
WARNING
Wear appropriate eye protection when
removing rivets. Failure to comply may
result in injury to personnel.
(12) Remove four rivets (34), washers (35), strip (36), and
two plates (37) from battery box (5).
(13) Remove adhesive tape (38) from strip (36).
b. Installation.
(1) Cut adhesive tape (1) to 18 1/4 in. (465 mm).
(2) Install adhesive tape (1) on strip (2).
(3) Install two plates (3) and strips (2) on battery box (4)
with four screws (6), washers (5) and nuts (6.1).
Change 1
7-285
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals