OIL PRESSURE TRANSMITTER REPLACEMENT

TM 9-2320-366-20-3

7-49. OIL PRESSURE TRANSMITTER REPLACEMENT

This task covers:

a. Removal

c. Follow-On Maintenance

b. Installation

INITIAL SETUP

Equipment Conditions

Materials/Parts

Cab raised (TM 9-2320-366-10-1).

Antiseize Compound (Item 58, Appendix D)

Batteries disconnected (para 7-57).

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

a. Removal.

(1) Disconnect connector P32 (1) from oil pressure

transmitter (2).

(2) Remove oil pressure transmitter (2) from fitting (3).

b. Installation.

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area. If

adhesive, solvent, or sealing compound

gets on skin or clothing, wash

immediately with soap and water.

Failure to comply may result in injury to

personnel.

(1) Apply antiseize compound to threads of oil

pressure transmitter (2).

(2) Install oil pressure transmitter (2) in fitting (3).

(3) Connect connector P32 (1) to oil pressure transmitter (2).

Change 2