Installation. - TM-9-2320-366-20-31003

TM 9-2320-366-20-3

b. Installation.

(1) Turn engine speed sensor (5) to the right in fly wheel

housing (6) until engine speed sensor contacts fly wheel.

(2) Turn engine speed sensor (5) to the left out of fly wheel

housing (6) two full turns.

(3) Tighten jam nut (4) on engine speed sensor (5).

(4) Connect engine speed sensor connector (2) to connector

P38 (3).

(5) Connect connector clamp (1) on engine speed sensor

connector (2).

c. Adjustment.

(1) Lower cab (TM 9-2320-366-10-1).

(2) Connect batteries (para 7-57).

NOTE

Perform step (3) on vehicles not equipped with

(3) Connect STE/ICE-R to DCA connector (1).

(4) Start engine (TM 9-2320-366-10-1).

NOTE

Perform step (5) on vehicles equipped with

If engine speed is not obtained in steps (5) or

(6), perform steps (7) through (13).

(5) Depress accelerator pedal and check tachometer

operation (TM 9-2320-366-10-1).

NOTE

Perform step (3) on vehicles not equipped with

(6) Perform STE/ICE-R test 10 and verify engine speed (TM

9-4910-571-12&P).

7-249