Disassembly. - TM-9-2320-366-20-30989

TM 9-2320-366-20-3

NOTE

Tag connectors and connection points prior to

disconnecting.

Connectors for right side are P13, P14, and P12.

(4) Disconnect connectors P4, P19, and P20 (6) from

housing (3).

(5) Remove three nuts (7) and housing (3) from bumper (8).

b. Disassembly.

(1) Remove two screws (1) and lens retainer (2) from

housing (3).

(2) Remove three nuts (4), resilient mounts (5), washers (6),

and lockwashers (7) from housing (3).

Discard

lockwashers.

(3) Remove three adapters (8) and grommets (9) from

housing (3). Discard grommets.

c. Assembly.

(1) Install three grommets (1) and adapters (2) on housing

(3).

(2) Install three resilient mounts (4) on housing (3) with three

washers (5), lockwashers (6), and nuts (7).

(3) Install lens retainer (8) on housing (3) with three screws

(9).

7-237