COMPOSITE FRONT LIGHT ASSEMBLY REPLACEMENT/REPAIR

TM 9-2320-366-20-3

7-40. COMPOSITE FRONT LIGHT ASSEMBLY REPLACEMENT/REPAIR

This task covers:

a. Removal

d. Installation

b. Disassembly

e. Follow-On Maintenance

c. Assembly

INITIAL SETUP

Equipment Conditions

Materials/Parts

Batteries disconnected (para 7-57).

Dispenser, Pressure Sensitive Adhesive Tape

Cab raised (TM 9-2320-366-10-1).

Lockwasher (2) (Item 96, Appendix G)

Packing, Preformed (Item 191, Appendix G)

Tools and Special Tools

Tool Kit, Genl Mech (Item 46, Appendix C)

Wrench, Torque, 0-200 lb-in. (Item 59, Appendix C)

Socket Set, Socket Wrench (Item 34, Appendix C)

a. Removal.

NOTE

Both composite front light assemblies are

removed the same way. Left side shown.

Tag wires and connection points prior to

disconnecting.

Connectors for right side are P8, P9 and

P10.

(1) Disconnect connectors P22, P23, and P24 (1) from

composite front light assembly (2).

(2) Remove two screws (3), lockwashers (4), three terminal

lugs (5), and composite front light assembly (2) from

front bumper (6). Discard lockwashers.