Composite Taillight Assembly Installation (All Models Except M1088/M1089).

TM 9-2320-366-20-3

7-39. COMPOSITE TAILLIGHT ASSEMBLY REPLACEMENT/REPAIR (CONT)

Composite Taillight Assembly Installation (All Models

Except M1088/M1089).

NOTE

Left and right composite taillights are installed

the same way. Left side shown.

Install plastic cable ties as required.

(1) Position two lockwashers (1), screws (2), terminal lug

TL18 (3), and composite taillight assembly (4) on taillight

carrier (5).

(2) Tighten two screws (2) to 35-42 lb-ft (48-57 Nm).

(3) Connect connectors P74, P76, P77, P78 (6) to

composite taillight connectors 22-461, 24, 23, 21 (7).

(4) Install clamp (8) on taillight carrier (5) with screw (9) and

self-locking nut (10).

k. Disassembly.

(1) Remove six screws (1), cover (2), and preformed

packing (3) from housing (4).

Discard preformed

packing.

(2) Remove two screws (5), bezel (6), lens (7), and retainer

(8) from cover (2).

Change 1