Chassis Clearance and Marker Light Installation.

TM 9-2320-366-20-3

d. Chassis Clearance and Marker Light Installation.

WARNING

Adhesives, solvents, and sealing compounds

can burn easily, can give off harmful vapors,

and are harmful to skin and clothing. Keep

away from open fire and use in a well-

ventilated area. If adhesive, solvent, or

sealing compound gets on skin or clothing,

wash immediately with soap and water.

Failure to comply may result in injury to

personnel.

(1) Apply adhesive to threads of screw (1).

(2) Install screw (1) in base (2) with nut (3).

NOTE

Clearance and marker lights originally come

with cork gaskets. Discard cork gaskets and

replace with rubber gaskets PN 12421469.

(3) DELETED

NOTE

Perform step (4) on three center clearance

lights on M1084/M1086 and M1089.

(4) Install gasket (4) and base (2) on vehicle with four

screws (5), washers (6), and nuts (7).

NOTE

Perform step (5) on three center clearance

lights on all models except M1084/M1086

and M1089.

(5) Install gasket (4) and base (2) on vehicle with four

washers (8), screws (5), washers (6), and nuts (7).

Change 1

7-223