Installation. - TM-9-2320-366-20-30834

TM 9-2320-366-20-3

7-14. ELECTRICAL GAGES REPLACEMENT (CONT)

b. Installation.

CAUTION

Ensure dipswitch settings are correct.

Failure to comply may result in inaccurate

speedometer readings.

NOTE

Perform steps (1) through (3) on

speedometer.

(1)

Remove cover (1) from speedometer (2).

(2) Set dipswitches 3,6,7, and 9 in the down position.

(3) Set dipswitches 1,2,4,5,8, and 10 in the up position.

NOTE

Note position of speedometer prior to

installation.

(4) Position speedometer (2) in instrument panel

assembly (3) with retaining ring (4) and two self

locking nuts (5).

(5) Tighten two self-locking nuts (5) to 9 lb-in. (1 Nm).

(6) Install two protective caps (6) on speedometer (2).

NOTE

Install plastic cable ties as required.

(7) Connect connector PX8 (7) on speedometer

connector (8).

(8) Connect connector clamp (9) on speedometer

connector (8).

c. Follow-On Maintenance.

(1) Install instrument panel assembly (para 7-15).

(2) Check gage(s) operation (TM 9-2320-366-10-1).

End of Task.

7-92

Change 2