Installation. - TM-9-2320-366-20-30757

TM 9-2320-366-20-3

(5)

Disconnect voltage regulator connector (10) from

voltage regulator (5).

(6)

Remove two screws (11), lockwashers (12), and

voltage regulator (5) from alternator (13). Discard

lockwashers.

b. Installation.

WARNING

Adhesives, solvents, and sealing com-

pounds can burn easily, can give off

harmful vapors, and are harmful to skin

and clothing. Keep away from open fire

and use in a well-ventilated area.

adhesive, solvent, or sealing compound

gets on skin or clothing, wash

immediately with soap and water. Failure

to comply may result in injury to

personnel.

(1) Apply sealing compound to threads of two screws (1).

(2) Position voltage regulator (2) on alternator (3) with two

lockwashers (4) and screws (1).

(3) Tighten two screws (1) to 65 lb-in. (7 N m).

(4) Connect voltage regulator connector (5) to voltage

regulator (2).

7-21